| View previous topic :: View next topic |
| Author |
Message |
Popeye New visitors - please read the rules.
Joined: 14 Sep 2008 Posts: 1
|
Posted: Sun Sep 14, 2008 1:57 am
Post subject: |
|
|
| may i please have the link for the v3.14 bios? thanks in advance.
|
|
| Back to top |
|
 |
|
|
alexbf2142 New visitors - please read the rules.
Joined: 13 Sep 2008 Posts: 2
|
Posted: Sun Sep 21, 2008 12:57 am
Post subject: |
|
|
Can you send me the 3.14 bios award at my e-mail adress or private message please??
it's urgent!!
thank you
|
|
| Back to top |
|
 |
beng New visitors - please read the rules.
Joined: 23 Sep 2008 Posts: 1
|
Posted: Tue Sep 23, 2008 12:48 am
Post subject: |
|
|
Edwin,
First of all you are doing an outstanding job with this forum. It is the most useful site on the net regarding the issues with these motherboards. I have a customer with a compaq sr1834nx system that had corrupt bios. Bios checksum error on boot. This system was long out of warranty. Naturally the compaq flash from the HP site was no option since it had to be run from windows. After 7 bootdisks and the usual errors about not an award bios, etc. I was able to make a successful boot disk using the flashv7.exe utility. It has the 314.bin and the autoexec file is already set up so just boot and go. I can send you a copy if you would like it to send to the appropriate people who could use it.
For those reading this, the first 2 rules of flashing bios are:
1. If its not broke, don't fix it. (especially if it is your only computer)
2. If it is still in warranty, don't fix it....send it in. (you wouldn't fix the computer in your car yourself if it was still in warranty.)
That being said, if it is out of warranty and you have the time/desire and nothing to lose by trying, then that is what these forums are for. With patience and a logical approach, you will learn a great deal.
Goldwing
i was wondering if you can send me the files for the boot disk goldwing is talking about here im having the same problem, thanks
|
|
| Back to top |
|
 |
edwin The Hardware Archivist

Joined: 20 Mar 2002 Posts: 4645 Location: Netherlands
|
Posted: Tue Sep 23, 2008 7:56 am
Post subject: |
|
|
I'll send the .bin file, there's a DOS flasher listed in the first page of this thread.
I'm currently working on a bootable iso for this stuff. Please have some
patience, starting a new company as well.
_________________ edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
 |
gregthebaker New visitors - please read the rules.
Joined: 05 Oct 2008 Posts: 1
|
Posted: Sun Oct 05, 2008 8:46 am
Post subject: Help requested |
|
|
Yeah, I too need this 3.14 update as my pc will soon drive me mad w/o it. Thanks in advance.
|
|
| Back to top |
|
 |
descendant75 New visitors - please read the rules.
Joined: 05 Dec 2008 Posts: 2
|
Posted: Fri Dec 05, 2008 12:32 am
Post subject: |
|
|
well i hope you still check this old post edwin.
i am also in need of the 3.14 bin.
i would be very grateful if you or someone that still has it could send it to me.
thank you for your assistance.
|
|
| Back to top |
|
 |
lobdell New visitors - please read the rules.
Joined: 08 Jan 2008 Posts: 2
|
Posted: Sun Dec 14, 2008 1:26 am
Post subject: |
|
|
Edwin i contacted you a while back and got the v3.14 bios from you if you could message me that back again seems how now i cant even get any version of windows to install it just locks up during installation. but i can get linux live to run for days with no lock ups. i have broken it down to find that all the other components are fine except the motherboard. i have a spare processor and ram so i have swapped it multiple times. Im thinking it is the bios. could you send me all the versions you have so i can see which one works the best.
thanks,
lobdell
|
|
| Back to top |
|
 |
descendant75 New visitors - please read the rules.
Joined: 05 Dec 2008 Posts: 2
|
Posted: Sun Dec 14, 2008 4:37 pm
Post subject: |
|
|
edwin, thank you so very much and sorry for the late reply.
lobdell, i seem to have the same issue as you. and i verified that all my components were good as well. i even removed everything and swapped hard drives trying both sata and then eide. i also tried other power supplies.
mine locks up right when it first says "setup is starting windows" at the bottom of the screen. i tried the press f5 instead of f6 fix i read about on some other site and still nothing.
microsoft says it's a hardware issue(something that is connected is bad like cdrom or hard drive, etc.) so try removing or replacing them.
some other sites say it's a bios problem. in my case they have all been wrong so far.
only things i haven't tried are a earlier bios than 3.13 or a new motherboard.
|
|
| Back to top |
|
 |
edwin The Hardware Archivist

Joined: 20 Mar 2002 Posts: 4645 Location: Netherlands
|
Posted: Sun Dec 14, 2008 9:27 pm
Post subject: |
|
|
try a memtest86 bootable CD. I think it's the memory sticks, seen a few reports lately about the memory used in these machines...
_________________ edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
 |
svenable New visitors - please read the rules.
Joined: 15 Dec 2008 Posts: 5
|
Posted: Mon Dec 15, 2008 5:45 pm
Post subject: HP a1330n BIOS Problem |
|
|
| I updated to BIOS 3.15 and now I can't use any USB devices. Can anyone help please? The motherboard is ASUS A8AE-LE.
|
|
| Back to top |
|
 |
richhed New visitors - please read the rules.
Joined: 17 Dec 2008 Posts: 1
|
Posted: Wed Dec 17, 2008 6:07 pm
Post subject: 3.14 Bios pls pls pls? |
|
|
Hi! Great Forum!
Any way I could get someone (Edwin, maybe?) to PM or email me the 3.14 BIOS for the A8AE-LE board?
Thanks in advance.
|
|
| Back to top |
|
 |
svenable New visitors - please read the rules.
Joined: 15 Dec 2008 Posts: 5
|
Posted: Wed Dec 17, 2008 6:17 pm
Post subject: richhed |
|
|
| Did that... Edwin was gracious to send me 3.14. I up/downgraded (whichever) and still no USB connectivity... Any more ideas?
|
|
| Back to top |
|
 |
coraleric New visitors - please read the rules.
Joined: 18 Dec 2008 Posts: 1
|
Posted: Thu Dec 18, 2008 1:01 am
Post subject: Need 3.14 plz |
|
|
| Edwin, plz send me the 3.14 BIOS i having the same issues, thanks.
|
|
| Back to top |
|
 |
edwin The Hardware Archivist

Joined: 20 Mar 2002 Posts: 4645 Location: Netherlands
|
Posted: Thu Dec 18, 2008 9:20 am
Post subject: |
|
|
Thinking about the USB issue, is this for all the USB ports on the board? Did you clear the cmos settings after flashing?
_________________ edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
 |
svenable New visitors - please read the rules.
Joined: 15 Dec 2008 Posts: 5
|
Posted: Thu Dec 18, 2008 2:12 pm
Post subject: Pavilion a1330 woes... |
|
|
| Yes, all USB ports are out. I cleared the CMOS settings and still no change. Thanks for the suggestion. Any more?
|
|
| Back to top |
|
 |
|
|
|